How to clean Platypus Gravity Filter? Step-by-step Guide

Are you an avid hiker or camper who loves to go off the grid and rely on filtering their own water? How to clean Platypus Gravity Filter? If yes, then the Platypus Gravity Filter is perfect for you! Not only is it compact and efficient, but it is also low maintenance. 

If you want to ensure that your filter lasts longer, you must learn how to clean it properly. In this guide, we will take you through a step-by-step process of cleaning your Platypus Gravity Filter. We will also discuss how to resolve issues of clogged filters and provide Platypus cleaning instructions. So the next time you are out exploring, you can rest assured that you always have clean drinking water.

How to Clean Platypus Gravity Filter?

Platypus GravityWorks Filter System is an innovative and effective solution for filtering dirty water into clean water. This system uses plastic tubing and gravity to filter water without requiring pumping. It’s faster and easier than other pump-free filters available in the market. However, to ensure that the system provides clean and safe water, it is crucial to maintain it properly, especially the microfilter. The microfilter can be easily backflushed in just 4 seconds to maintain the filter’s performance. 

Cleaning a Platypus Gravity Filter is a straightforward process that can be accomplished in just a few steps:

  1. Backwash the Filter

First, you need to backwash the filter. To do this, detach the clean side of the filter from the dirty side, then fill the clean bag with clean water and hang it from a tree or another sturdy object. Next, squeeze the dirty bag to force the water through the filter in the reverse direction. This will dislodge any debris or particles that may be trapped in the filter.

  1. Rinse the Filter

After backwashing, rinse the filter with clean water. This can be done by filling the clean bag with clean water and squeezing it through the filter, just as you did with the dirty water during the backwash. This will help to remove any remaining debris or particles.

  1. Disinfect the Filter

To disinfect the filter, you can soak it in a solution of one part unscented household bleach to ten parts water for about 30 minutes. Alternatively, you can use a water purification tablet according to the manufacturer’s instructions. This will help to kill any bacteria or viruses that may be present on the filter.

  1. Rinse Again

After disinfecting the filter, rinse it thoroughly with clean water. This will help to remove any residual bleach or another disinfectant from the filter.

  1. Dry the Filter

Finally, allow the filter to dry completely before storing it. You can do this by hanging it up to air dry, or by laying it flat in a well-ventilated area.

  1. Use a hair dryer

To remove any water remaining inside the reservoirs, use a hair dryer or several dry paper towels.

  1. Find to prop open the lid 

To get as much air inside the reservoir as possible, prop the lid open using anything you can find.

Don’t keep the tanks and tubes dry until they’re completely dry!

The Platypus GravityWorks Filter System is highly effective, meeting EPA and NSF guidelines for filtering bacteria and protozoa. If you properly maintain the filter, it will provide clean drinking water for years to come. Follow these simple steps to clean your Platypus GravityWorks Water Filter and ensure safe drinking water during your next outdoor adventure.

Platypus Gravity works filter clogged

Platypus GravityWorks filters are known for providing clean water faster than most pump systems. However, after frequent use, the filter can become clogged, reducing its effectiveness. To clean the Platypus Gravity Works filter, start by flushing it with clean water. 

The Platypus GravityWorks 4.0L Filter System is easy to use and versatile for soloists and groups alike. With a filter life of 1500L, it effectively removes contaminants down to 0.2 microns, providing clean drinking water for individuals and groups in the wilderness. 

The Gravity Works system consists of an inline filter connected via plastic tubing between two bags – a clean bag and a dirty bag – to produce clean water in a gravity-powered filtration system.

Platypus quickdraw filter cleaning

Platypus filters are well-known for their excellent performance in producing clean and safe drinking water. The Platypus GravityWorks Water Filter System is great for long hikes or traveling backcountry. With the GravityWorks filter, cleaning is easy and just involves a four-second backflush and a simple field test to ensure that the filter is functioning correctly. Platypus’s QuickDraw Micro filter, a lightweight, bacteria, and protozoa purifier, is also great for ultralight backpacking. In both filters, regular cleaning and maintenance are essential to ensure that they perform optimally. Platypus provides a step-by-step guide for GravityWorks water filter maintenance to keep your filter in good condition for your next trip.

Platypus cleaning instructions

The Platypus GravityWorks Water Filter is a gravity-powered filtration system that requires little maintenance. Occasional rinsing or back flushing is all that’s required to keep the filter running smoothly.  However, it is essential to avoid letting large particles enter the filter, as this can cause clogging.  

Refill the bag only when it’s almost empty, to prevent any mishap. Platinum Hydration provides a video tutorial that depicts how to perform care and maintenance on their GravityWorks Water Filter system.

Compared to any other pump-free water filter, the Platypus GravityWorks Water Filter system provides a steady supply of clean water faster and more efficiently. 

It connects a clean and dirty bag with plastic tubing for easy filtration. Before starting, it is important to gather an adequate supply of clean water and follow all the instructions as mentioned, for optimal use and maximum lifespan of the Platypus Gravity Filter.

How to use the platypus water filter

The Platypus GravityWorks Water Filter is an incredibly easy-to-use and pump-free filtration system that works with gravity. It connects two bags, one for dirty water and the other for clean water. This system is perfect for filtering large quantities of water quickly, so you always have a clean water source on hand. 

Using a Platypus water filter is a simple process that involves just a few steps:

  1. Fill the Dirty Bag: Fill the dirty bag with water from a stream, river, or another freshwater source.
  2. Hang the Dirty Bag: Hang the dirty bag from a tree or other sturdy object using the included strap.
  3. Connect the Filter: Attach the clean side of the filter to the dirty bag, making sure that the arrows on the filter point in the direction of the clean bag.
  4. Fill the Clean Bag: Fill the clean bag with water, either by dipping it in the stream or using a separate water container.
  5. Collect the Water: Allow the water to flow through the filter and into the clean bag. You may need to squeeze or massage the dirty bag to help the water flow.
  6. Drink the Water: Once the clean bag is full, disconnect it from the filter and enjoy clean, filtered water.

However, it’s important to note that the Platypus GravityWorks Filter requires proper care and field integrity tests to maintain its performance. One simple way to clean it is by sloshing soapy water inside the filter to remove any debris. With minimal effort, you can ensure that your Platypus GravityWorks Water Filter works efficiently whenever you need it.

Platypus Quickdraw Gravity

The Platypus Gravity Works Water Filter is an excellent option for hikers, campers, or anyone looking to obtain clean water quickly without having to pump or exert too much effort. The system consists of connecting two bags via plastic tubing, making painless water filtration a reality for individuals. 

The Platypus Gravity Works Filter has an easy and straightforward cleaning process. A slosh of soapy water or using a kit from REI can clean the filter quickly. Additionally, the filter has a four-second back flush and simple integrity test that provides a steady water supply throughout. All in all, If you’re looking for an easy and effective way to obtain potable water in the great outdoors, the Platypus GravityWorks Water Filter is a perfect choice!

It is equally necessary to maintain retaining walls, which are essential to increasing the value of your house and improving the look of your garden. You’ll get here on How To Clean retaining wall blocks with details.

People also ask to know

Why is it important to clean my Platypus Gravity Filter regularly?

Cleaning your Platypus Gravity Filter regularly is important to ensure a steady supply of hassle-free water whenever you need it. Occasional rinsing or back flushing is required to maintain the filter and ensure it continues to work effectively.

It is important to avoid allowing large particles to enter the filter as they can clog up the filtration element. With the Platypus GravityWorks water filter, you can enjoy painless water filtration for yourself or a group. The filter connects via plastic tubing between two bags: a clean bag and a dirty bag.

How often should I Backflush my Gravity Works filter cartridge?

To maintain the efficiency of your Gravity Works filter cartridge, it is recommended to backflush it every time you use it. The cartridge has an approximate filter life of 1500L but this can be reduced to 1000-1200L due to the influence of turbidity. 

The Platypus GravityWorks filter system remains versatile, lightweight, and easy to use, making it a reliable option for both soloists and groups looking to filter water quickly and efficiently.

How do you backflush a Platypus gravity filter?

Back flushing a Platypus gravity filter is necessary for optimal performance and to unclog particles from the filter. This can be done before and after use to speed up the flow and prepare for storage. The Platypus Gravity Works filter can filter up to 1.75 L/min under pristine conditions and is a popular and efficient option for groups and extended trips.

To back flush, use hydrostatic pressure to reverse the flow and clear out particulate buildup in the filter.

This can be done by filling the clean bag with water, attaching it to the dirty bag, and raising the clean bag above the dirty bag to force water through the filter in the opposite direction.

How long does the Platypus gravity filter last?

1500 liter is the platypus gravity filter last. The Platypus GravityWorks Water Filter is a fast and hassle-free way to get clean water while on the go. The system uses gravity to filter water and comes in sizes of 2L, 4L, and 6L, making it perfect for soloists and groups alike. 

According to Platypus Hydration’s website, with proper care and maintenance, the GravityWorks Water Filter can last for years. While there may be some inconvenience in using it for a couple or group, the benefits of a clean, filtered water bottle make it well worth considering for any outdoor adventure.

Last Word

Keeping your Platypus Gravity Filter clean ensures that it performs optimally and lasts longer. It’s essential to regularly clean and store the filter properly. 

We also cover how to clean Platypus Quickdraw Filter, cleaning instructions, and how to use Platypus Water Filter. With these tips, you’ll be able to keep your Platypus Gravity Filter in tip-top shape for your next outdoor adventure.

Leave a Comment